If you think RoHS is in your rear-view mirror, think again. A significant electronics market is going to feel the impact of RoHS within the next few years and may be caught unprepared.
Medical devices will fall under the RoHS scope starting in 2014, according to Gary Nevison of Newark/element14. Medical devices have so far been exempt from RoHS because of the critical nature of the devices and the necessary use of hazardous materials such as lead to protect users from radiation.
Medical devices fall under its regulations in 2014 but the sale of non-compliant devices into the EU won't be halted until 2019.
The manufacture of medical devices is still a very tightly held business. It is highly regulated, and it is difficult to quality for the various approvals required by law. Medical electronics companies have also been slow to outsource manufacturing, preferring to retain quality control in-house. Now that medical falls under the RoHS, it is likely the industry will experience many of the same issues the broader electronics industry has in terms of interpreting and implementing RoHS.
Nevison noted of a recent meeting in Belgium:
During the meeting it was confirmed that passenger lifts will be considered large-scale fixed installations and would therefore be excluded from the scope of the RoHS Recast. It was also recommended to exclude pipe organs and electric bicycles from scope in the future. However, petrol engine powered garden equipment and toys with secondary electrical functions are expected to fall within scope.
While no change to the definition of homogeneous material was deemed necessary further clarification was requested on both thin coatings and CrVI passivation coatings.
Medical equipment companies can continue to ask for exemptions to the rule.
Hi Gary--thanks for the additional information. As always, you are the resident expert on all things RoHS (and WEEE and REACH and...) Quite a responsibility
Just for clarity all these issues are still under review, including Article 2.2 and its definition of "making available on the market". This will apply to all relevant product categories, not just medical. In terms of gardening equipment this was discussed as part of the EC 3rd stakeholder workshop. Because of the ban of lead in solder used in gardening equipment an enviromental benefit is expected. We will have to wait for Government Guidance and the important FAQ document that will help guide industry. Unfortunately the latter was originally expected in June but has now slipped to October.
The Medical Industry should talk to the Military/Defense Industry for advice and comments. RoHS componets are OK for Phones and other electrics devices that only going to be used for 2-5 years before they get up graded. Tin Whiskers might take longer to short out these devices. I am not sure about the Medical devices. We need to stop listing to Europe and these Lead issues. Maybe we should evaluate all Lead reclaim that contaminating various places in CHINA!
I found the categories mentioned from the Beligian meeting to be quite arbitrary. I can understand the reluctance to overregulate medical but garden equipment?
EBN Dialogue enables and encourages you to participate in live chats with notable leaders and luminaries. Not only editors and journalists, but the entire EBN community is able to comment and ask questions. Listed below are upcoming and archived chats.
Archived Dialogues
Thailand Stages a Comeback Join EBN contributor Jennifer Baljko on Thursday August 23, 2012, at 11:00 a.m. EST for a live chat on how electronic manufacturers in Thailand have shored up their supply chain to reduce the impact of future natural disasters.
Euro-Crisis: What It Means for High-Tech Firms Join EBN Editor in Chief Bolaji Ojo and Contributing Editor Jennifer Baljko on Thursday, July 12, at 10:00 a.m. EDT for a Live Chat on high-tech and Europe's economic difficulties.
Microsoft Surface: Potential Winners & Losers What are the implications for the electronics industry supply chain of Microsoft Corp.'s decision to launch its own tablet PC? Join industry veteran and EE Times' systems and OEM expert Rick Merritt on Tuesday, July 3, at 12:00 pm EDT for a Live Chat on this subject.
Join EBN contributor Jennifer Baljko on Thursday August 23, 2012, at 11:00 a.m. EST for a live chat on how electronic manufacturers in Thailand have shored up their supply chain to reduce the impact of future natural disasters.
Peter Drucker famously said "Trying to predict the future is like trying to drive down a country road at night with no lights while looking out the back window." Yet in the razor's-edge world of electronics—with a lean supply chain and just-in-time demands—the need to know the future is vital.
While no one really can accurately predict the future, we can take guidance from another Drucker saying which is the best way to predict the future is to create it.
You've heard the saying "the No. 1 supply chain risk is your people." That hasn't always been the case. But today's complex global supply chain requires a new type of multitalented employee. It's one who understands, finance, marketing, economics, is savvy with technology, graceful with relationships and can think analytically.
Where are these people? Are universities properly preparing the next generation supply chain professionals? How do train your existing workforce for these new, demanding positions?
Brian Fuller, editor-in-chief of EBN, will lead a 60-minute Avnet Velocity panel discussion that will ask and answer these and other questions swirling around today's supply-chain talent challenges.
To save this item to your list of favorite EBN content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This