YT24 hand held airleg rock drill is rock drilling equipment with high efficiency. It is widely used in rock drilling. It's very important to coal mine, railway, traffic, water conservancy and so on. According to the different of space, it can be used with FT140BD short air leg and FT140B long air leg
YT27 hand held air-leg rock drill is rock drilling equipment with high efficiency. It is widely used in rock drilling. It's very important to coal mine, railway traffic, water conservancy and so on. According to the different of space, it can be used with FY250 grease squirt and FT160A (FT160B,FT160C,FT170) air leg,it also can be fixed on Drill carriage and drilling frame.
YT28 hand held air-leg rock drill is rock drilling equipment with high efficiency. It is widely used in rock drilling. It's very important to coal mine, railway traffic, water conservancy and so on. According to the different of space, it can be used with FT160BD short air leg and FT160BC long air leg,it also can be fixed on Drill carriage and drilling frame.
YSP45 air leg rock drill designed for operations in medium-hard and hard rock in bore raising.Able to drill up-holes and holes 60°to 90°to the horizontal plane .It can also be used for bolt setting.
YSP45 hand held air leg rock drill
YT29A hand held air-leg rock drill is rock drilling equipment with high efficiency. It is widely used in rock drilling. It's very important to coal mine, railway traffic, water conservancy and so on. According to the different of space, it can be used with FT160A,FT160C long air leg, FT160B short air leg and FT170 air leg,it also can be fixed on Drill carriage and drilling frame.
7655 air-leg rock drill is rock drilling equipment with high efficiency. It is widely used in rock drilling. It's very important to coal mine, railway traffic, water conservancy and so on. According to the different of space, it can be used with FY200B grease squirt and FT160A(or FT160B,FT160C) air leg,it also can be fixed on Drill carriage and drilling frame.
7655 hand held air leg rock drill
Y19 Pneumatic Hammer is widely used in metallurgy, coal industry, road construction, mining and other drilling operations.
The Y26 rock drill machine is a kind of high efficiency air leg rock drill machinery. It is mainly used for diging into mine laneway and blasting holes in all drilling works. It is indispensably importance machine tool in metallurgy, coal, railway, traffic, water conservancy construction and national defence stone project.
EBN Dialogue enables and encourages you to participate in live chats with notable leaders and luminaries. Not only editors and journalists, but the entire EBN community is able to comment and ask questions. Listed below are upcoming and archived chats.
Archived Dialogues
Thailand Stages a Comeback Join EBN contributor Jennifer Baljko on Thursday August 23, 2012, at 11:00 a.m. EST for a live chat on how electronic manufacturers in Thailand have shored up their supply chain to reduce the impact of future natural disasters.
Euro-Crisis: What It Means for High-Tech Firms Join EBN Editor in Chief Bolaji Ojo and Contributing Editor Jennifer Baljko on Thursday, July 12, at 10:00 a.m. EDT for a Live Chat on high-tech and Europe's economic difficulties.
Microsoft Surface: Potential Winners & Losers What are the implications for the electronics industry supply chain of Microsoft Corp.'s decision to launch its own tablet PC? Join industry veteran and EE Times' systems and OEM expert Rick Merritt on Tuesday, July 3, at 12:00 pm EDT for a Live Chat on this subject.
Join EBN contributor Jennifer Baljko on Thursday August 23, 2012, at 11:00 a.m. EST for a live chat on how electronic manufacturers in Thailand have shored up their supply chain to reduce the impact of future natural disasters.
Peter Drucker famously said "Trying to predict the future is like trying to drive down a country road at night with no lights while looking out the back window." Yet in the razor's-edge world of electronics—with a lean supply chain and just-in-time demands—the need to know the future is vital.
While no one really can accurately predict the future, we can take guidance from another Drucker saying which is the best way to predict the future is to create it.
You've heard the saying "the No. 1 supply chain risk is your people." That hasn't always been the case. But today's complex global supply chain requires a new type of multitalented employee. It's one who understands, finance, marketing, economics, is savvy with technology, graceful with relationships and can think analytically.
Where are these people? Are universities properly preparing the next generation supply chain professionals? How do train your existing workforce for these new, demanding positions?
Brian Fuller, editor-in-chief of EBN, will lead a 60-minute Avnet Velocity panel discussion that will ask and answer these and other questions swirling around today's supply-chain talent challenges.
To save this item to your list of favorite EBN content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
