Bed Levelling for 3D Printer

One of the challenges to consumer 3D printing involves leveling the print platform. Current methods (insert a business card or piece of paper and adjust screws until it “just fits”) lack precision. Many “air prints” and much frustration result from poorly adjusted print platforms.

I propose building a device that can be placed on the rails and used to measure the platform to print head height at each adjustment point. This would eliminate the guesswork in bed leveling.

This machine would have an adjustable sensor height so that the sensor could be matched to nozzle position. The leveling screws will still have to be turned by hand, but the extruder-to-bed distance can be set with high precision. The prototype would use the USB connection to a computer to monitor the sensor-to-metal-bed distance. The device can be removed from the rails after the leveling process has been performed.

This opens the door for future 3D machine enhancements such as motorized leveling screws. Incorporating auto leveling into the design would make the machines more user friendly — a necessity for significant market penetration. In this scenario, the printer would move to each position and adjust the bed under processor control.

Current estimates indicate that 100,000 consumer printers are spread throughout the world, but that number could increase to 1 million or more within 2-5 years.

I think that kits (hardware parts and 3D print files) for such a leveling device would be welcomed now.

This article was originally published on EBN's sister publication EDN.

0 comments on “Bed Levelling for 3D Printer

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.