Latest Research

IHS: Reports of Counterfeit Parts Quadruple Since 2009

EL SEGUNDO, CA — Reports of counterfeit parts have soared dramatically in the last two years, presenting huge challenges for electronics manufacturing and especially the military and aerospace industry at a time when the U.S. government is tightening regulations covering fake components, according to information and analysis provider IHS (NYSE: IHS).

From original equipment manufacturers (OEMs) to contract manufacturers and from component suppliers to component buyers, supply chain participants in 2011 reported 1,363 separate verified counterfeit-part incidents worldwide, a fourfold increase from 324 in 2009, according to IHS. This marked the first time the reported number of incidents in a single year exceeded 1,000, a total that could encompass millions of purchased parts. This was according to IHS data, which includes information from the industry’s two recognized reporting entities—ERAI Inc., a privately held global information services organization and exclusive partner to IHS; and the Government-Industry Data Exchange Program (GIDEP).

The surge over the past two years is the latest development in a rapidly escalating global supply chain trend toward increased counterfeiting and piracy of global products, with counterfeit part reports having risen by nearly a factor of 700 over the last decade. The figure attached presents total counterfeit-part reports compiled by IHS showing suspect counterfeit or high-risk electronics for the period of 2001 to 2011.

The bulk of these incidents were reported by U.S.-based military and aerospace electronics firms. However, the parts themselves may impact any worldwide company using the same electronics within their products. With each report possibly encompassing thousands of parts and millions of dollars in revenue, the use of potential counterfeits represents a major liability with grave financial downside for these companies. Even more ominously, this phenomenon could pose a serious threat to human life or national security.

“The counterfeit issue is serious, it’s growing and it’s a major problem for electronics makers—especially military and aerospace companies,” said Rory King, director, supply chain product marketing at IHS. “The problem has grown increasingly hard to ignore, as reports of counterfeits have risen exponentially and most companies lack the awareness and capability to effectively detect and mitigate the growing problem. The reporting done by the industry can help other organizations pinpoint risky parts or suppliers. And now that United States legislation will hold defense suppliers accountable for counterfeit issues, access to these incident data becomes a critical decision-support capability for business systems.”

The counterfeit challenge
Counterfeit parts often are often cheap substitutes or salvaged waste components that fail to meet strict military and aerospace specifications, leading to potential failures. Even more concerning, these failures put lives at stake. Furthermore, there are fears that some counterfeit devices like integrated circuits have the potential to act as malicious Trojan horses that could be disabled remotely, compromising defense capability at critical times.

The expense to resolve a single counterfeit incident can be massive. For example, the government reported how the U.S. Missile Defense Agency learned that mission computers for Terminal High Altitude Area Defense (THAAD) missiles contained suspect counterfeit devices that could have led to an entire system failure. The cost of that fix was nearly $2.7 million.

Government action
To help combat the problem, President Obama on December 31, 2011, signed the fiscal year 2012 U.S. National Defense Authorization Act (NDAA), which adds regulations for counterfeit part detection and avoidance. Members at all tiers of the defense supply chain must put counterfeit risk mitigation procedures in place and certain steps must be completed within 270 days of the president’s signature.

New defense regulations include:

  • Contractors are now responsible for detecting and avoiding the use or inclusion of counterfeit electronic parts or suspect counterfeit parts
  • Contractors are also responsible for any rework or corrective action that may be required to remedy the use or inclusion of such parts
  • Defense contracts will no longer allow the cost of counterfeit electronic parts and suspect counterfeit electronic parts or the cost associated with rework or corrective action to resolve the use or inclusion of such parts
  • Qualification procedures and processes must be established to use trusted suppliers and procure electronics from authorized suppliers

All electronics makers at risk
The counterfeit problems are more widespread than a single incident report might suggest. According to IHS, a typical bill of materials (BOM) or parts list for a military/defense program can have anywhere from a few hundred to over tens of thousands of purchased parts, of which between 0.5 to 5 percent typically match incidents of counterfeit parts reported to ERAI. The same is true for medical equipment—products known for sharing high-reliability electronics needs with the military. When just one counterfeit poses major risk, the fact that a typical company has hundreds or thousands of matches to known problematic parts in circulation should be a major cause for concern. Combating the counterfeits
To achieve compliance with the new NDAA requirements and avoid the significant cost they may now incur for counterfeit incidents, companies in the military/aerospace electronics industry must obtain systems and data to analyze, assess, and act on counterfeit and suspect counterfeit electronic parts. They also need to know qualified and authorized government suppliers in order to use trusted suppliers and avoid those that are risky. With thousands of parts and suppliers scattered across programs and throughout the supply chain, this will not be easy. By making use of available tools and ongoing reports for counterfeit, substandard and high-risk parts, electronics makers can cut costs, avoid risk, and expedite NDAA compliance. IHS

1 comment on “IHS: Reports of Counterfeit Parts Quadruple Since 2009

  1. DataCrunch
    March 6, 2012

    Counterfeit parts continue to plague industries with no end in sight.

    Counterfeit parts, which are effectively inferior parts or even worse totally useless parts, are a major concern across many industries, not only defense and aerospace.  The pharmaceutical, chemical and medical industries continue to struggle with counterfeiting issues, which can be life threatening.  Retailers are also plagued with counterfeiting within their supply chains.  As supply chains become more global in nature with increased touch points, counterfeiting will continue to increase exponentially.  Unfortunately counterfeiters are becoming smarter as well in their counterfeiting methods.

    To help tackle these problems, companies, manufacturers and suppliers must implement effective asset tracking, track and trace, and in some instances advanced serialization systems.  These types of solutions will increase visibility within the supply chain and identify weak links that can be addressed and corrected.  Companies at a minimum should be starting to investigate strategies and intelligent approaches in tackling counterfeiting.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.